BL-003CA Pedestrian Crossing Road Marking Studs Pavement Studs
- IP68 Waterproof: Solar dock lights are made of high-quality aluminum alloy casting frame that effectively keeps them from crush even in road constructions, street, parking lot, green beltand will not be damaged. Making it suitable for most types of environments.
- Premium Quality: High-quality aluminum alloy frame can withstand up to 30 tons of weight, can be used in most roads, without fear of being crushed or damaged. They have been specifically designed with road safety in mind and can help to prevent serious accidents and emit rather than reflect light. It Can be perfect as the sun lane marker to illuminate your lane, can also be used for the dock, deck, path, driveway, garden, walkway, sidewalk, yard or courtyard.
|Flash or Steady
|Over 30 Tons
1 Isolate all power before commencing installation.
2 The road surface should be level and even ,any repair to the surface should be conducted prior to installation.
3 Cut a channel between holes approximately 15mm wide to a depth of 60mm,ensure the channel is cleaned of all debris.
4 Boring a specific size hole at the placement location of the road stud that should be Ø126mm*60mm.
5 Use a blowtorch to dry any dampness from the holes,failure to do so may result in the adhesive glue not bonding correctly.
6 Insert the protective rubber padding into the channel once it has been dried and had time to cool down.
7 Pour the adhesive glue into the hole and locate the road stud so that its lighted side is facing towards to drivers.
8 Inspect studs 2 hours after installation and re-adjust if there has any movement.
9 Inspect after 4 hours and check that all studs are firmly located and show no signs of movement, if all have set correctly re-instate power.
– Pedestrian walkway
– Illumination of public spaces (bicycle paths, pedestrian zones, etc …)
– Delineation of roads
– Decorative illumination